De-sta-co Output Overload Clutches Type F, FC, S, C, D, FC-S Manual de usuario Pagina 1

OVERLOAD CLUTCHESFOR INDEX DRIVESThe Driving Force in Automation“WARNING”®This is a controlled document. It is your responsibility to deliver this inf

10

11

99A45938000000

INSTALLATION, OPERATION ANDMAINTENANCE INSTRUCTIONSSAFETY INSTRUCTIONS1. Read your Overload Clutch Installation-Operation Instructions thoroughly befo

CLUTCH TYPESCAMCO clutches are designed to meet specific applicationrequirements. They are available in five basic designs.TYPE C•Clamped Hub•Clamped

INSTALLATION AND REMOVALINSTRUCTIONS FOR SHRINK DISCSShrink Discs are supplied ready for installa-tion. However, prior to tightening of lockingscrews

ASSEMBLY INSTRUCTIONSSee Fig. 3 for required assembliesImportant: To obtain maximum accuracy inpositioning the DRIVEN MEMBER, the INDEXDRIVE "CAM

5. Place BODY with the PLUNGERS facedown on a solid surface.6. Remove DETECTOR MOUNTING screwswhich will release the PLUNGER assemblies.Warning: The p

6. Place BODY with the PLUNGERS facedown on a solid surface.7. Remove DETECTOR MOUNTINGscrews which will release the PLUNGERassemblies.Warning: The pl

12. Disassemble, deburr and clean all parts.Remove .010" shim stock.13. Dowel pinthe DRIVE PLATE to the DIAL PLATE.Note: Dowel pins are factory i

CAMCO CLUTCHES are precision assembliesand should not be modified. Modification of theclutch will VOID THE CAMCO WARRANTY.APPLICATION RECOMMENDATIONS1